|
|
|
 |
  |
| The DR Series DIP rotary switch is available in through-hole, right angle, and surface mount versions and with 10 or 16 positions, with flush or extended shafts, and 4x1, 3x3, or 3x2 terminal layouts. The switch is sealed for vapor phase or IR reflow soldering. |
|
|
|
|
| Specifications |
| Rating |
Steady: 100mA 50VDC
Switching: 25mA 24VDC |
| Electrical Life |
15,000 Steps Min. at 25mA 24VDC |
| Contact Resistance |
Initial: 100mΩ Max.
After Life: 200mΩ Max. |
| Insulation Resistance |
100MΩ Min. at 250VDC |
| Dielectric Strength |
250VAC for 1 Minute |
| Capacitance |
5pF Max. |
| Operation Force |
200gf·cm Max. |
| Vibration Test |
Mil-Std-202F Method 201A
Frequency: 10-55-10Hz / 1 Minute
Direction: X, Y, Z
Time: 2 Hours Each Direction
High Reliability |
| Shock Test |
Mil-Std-202F Method 213B Condition A
Gravity: 50G, 11 msec.
Direction: 6 Sides
Times: 3 Each Direction
High Reliability |
| Temperature Range |
Operating: -25°C to 80°C
Storage: -40°C to 85°C |
| Soldering |
Wave: 260°C 5 Seconds
Hand: 350°C 2 Seconds 30 Watts |
| |
|
| Popular/Stocking Part Numbers |
| Part Number | Stocking | Spec | Positions | Terminals | Description |  | | | | | | | DR2-10R-B | Y |  |  | 10 | PCB Pins | 2x3, Flush Actuator, Real Coding, Tube Packaging
| | DR3-10R-B | Y | | | 10 | PCB Pins | 3x3, Flush Actuator, Real Coding, Tube Packaging
| | DR3-16R-B | Y | | | 16 | PCB Pins | 3x3, Flush Actuator, Real Coding, Tube Packaging
| | DR3A-10R-B | Y | | | 10 | Right Angle PCB Pins | 3x3, Flush Actuator, Real Coding, Tube Packaging
| | DR3AH-10R-B | Y | | | 10 | Right Angle PCB Pins | 3x3, 7.3mm Actuator, Real Coding, Tube Packaging
| | DR3H-10R-B | Y | | | 10 | PCB Pins | 3x3, 7.3mm Actuator, Real Coding, Tube Packaging
| | DR3H-16R-B | Y | | | 16 | PCB Pins | 3x3,7.3mm Actuator, Real Coding, Tube Packaging
| | DR3M-10R-B | Y | | | 10 | SMT | 3x3, Flush Actuator, Real Coding, Tube Packaging
| | DR3M-16R-B | Y | | | 16 | SMT | 3x3, Flush Actuator, Real Coding, Tube Packaging
|
|
|
|
|
|
