|
|
|
 |
   |
| The 8061 Series alternating pushbutton switch is cULus rated at 6A. This switch can be configured with a large variety of terminals, actuators, bushings, and contact materials. See the technical details page for more information. Also available in a momentary (8021 Series) version. If a smaller package is needed, the TP00 Series may be for you. |
|
|
|
|
| Specifications |
| cULus Ratings |
Q, G, and M
Contact Materials: |
6A 125VAC
3A 250VAC
6A 28VDC |
| Low Voltage Ratings |
B and K
Contact Materials: |
0.4VA Max. at 20V Max. (AC or DC) |
| Electrical Life |
50,000 Cycles Min. at Full Load |
| Contact Resistance |
Initial: 10mΩ Max. at 100mA 2-4VDC |
| Insulation Resistance |
1,000MΩ Min. |
| Dielectric Strength |
1,500V for 1 Minute |
| Temperature Range |
-30°C to 85°C |
| |
|
| Popular/Stocking Part Numbers |
| Part Number | Stocking | Spec | Function | Terminals | Description |  | | | | | | | 8161-J81ZGE22 | Y |  |  | 1P On-On | Solder | 6A 125VAC, Black Actuator, Black Panel Mount, Gold Over Silver Plated Contacts
| | 8161-SH9ABE | Y | | | 1P On-On | Horiz. Right Angle PCB | 0.4VA 20V Max., 7.6mm Actuator, 7.7mm Non-Threaded Bushing with Flat, Gold Over Nickel Plated Contacts
| | 8161-SHZGE | Y | | | 1P On-On | Solder | 6A 125VAC, 7.6mm Actuator, 7.7mm 1/4-40 Bushing with Flat, Gold Over Silver Plated Contacts
| | 8261-J81ZGE22 | | | | 2P On-On | Solder | 6A 125VAC, Black Actuator, Black Panel Mount, Gold Over Silver Plated Contacts
| | 8261-J81ZQE22 | Y | | | 2P On-On | Solder | 6A 125VAC, Black Actuator, Black Panel Mount, Silver Plated Contacts
| | 8261-SH9ABE | | | | 2P On-On | Horiz. Right Angle PCB | 0.4VA 20V Max., 7.6mm Actuator, 7.7mm Non-Threaded Bushing with Flat, Gold Over Nickel Plated Contacts
| | 8261-SHZGE | Y | | | 2P On-On | Solder | 6A 125VAC, 7.6mm Actuator, 7.7mm 1/4-40 Bushing with Flat, Gold Over Silver Plated Contacts
|
|
|
|
|
|
