|
|
|
 |
  |
| The LPS00 Series tiny sealed, surface mount, momentary pushbutton switch is completely waterproof (IP67 rated). This switch can be configured with a variety of terminals and contact materials. See the technical details page for more information. Also available in a through hole mount (LP00 Series) version and a non-sealed (TP00 Series) version. If a higher amperage rating is needed, the L021 Series may be for you. |
|
|
|
|
| Specifications |
| Standard Ratings |
G and L
Contact Materials: |
1A 125VAC
1A 28VDC |
| Low Voltage Ratings |
B and K
Contact Materials: |
0.4VA Max. at 20V AC or DC Max. |
| Electrical Life |
30,000 Cycles Min. at Full Load |
| Contact Resistance |
Initial: 20mΩ Max. at 100mA 2-4VDC |
| Insulation Resistance |
1,000MΩ Min. |
| Dielectric Strength |
1,500V for 1 Minute |
| Temperature Range |
-30°C to 85°C |
| Ingress Protection |
IP67 |
| |
|
| Popular/Stocking Part Numbers |
| Part Number | Stocking | Spec | Function | Terminals | Description |  | | | | | | | LPS11-FPD1SAKE | |  |  | 1P Off-(On) | Wide SMT | 0.4VA 20V Max., Flush Actuator, Tin Coated Gold Over Nickel Plated Contacts
| | LPS11-SD1SAKE | Y | | | 1P Off-(On) | Wide SMT | 0.4VA 20V Max., 5.8mm Actuator, Tin Coated Gold Over Nickel Plated Contacts
| | LPS12-SD1SAKE | Y | | | 1P On-(On) | Wide SMT | 0.4VA 20V Max., 5.8mm Actuator, Tin Coated Gold Over Nickel Plated Contacts
|
|
|
|
|
|
