|
|
|
 |
    |
| The T000 Series toggle switch is UL and cUL rated at 3A and one or two poles. This switch can be configured with a very large variety of terminals, actuators, bushings, and contact materials. See the technical details page for more information. Also available in rocker (T000 Series Rocker) and IP67 sealed (LT00 Series Toggle) versions. If a higher amperage is needed, the 5000 Series Toggle may be for you. |
|
|
|
|
| Specifications |
| UL/CSA Ratings |
Q, G, M, and L
Contact Materials: |
3A 125VAC
1.5A 250VAC
3A 28VDC |
| Low Voltage Ratings |
B and K
Contact Materials: |
0.4VA Max. at 20V AC or DC Max. |
| Electrical Life |
30,000 Cycles at Full Load |
| Contact Resistance |
Initial: 20mΩ Max. at 100mA 2-4VDC |
| Insulation Resistance |
1,000MΩ Min. |
| Dielectric Strength |
1,500V for 1 Minute |
| Temperature Range |
-30°C to 85°C |
| |
|
| Popular/Stocking Part Numbers |
| Part Number | Stocking | Spec | Function | Terminals | Description |  | | | | | | | T101-SHZGE | Y |  |  | 1P On-On | Solder | 3A 125VAC, 9.1mm Bat Actuator, 5.5mm 10-48 Bushing with Flat, Gold Over SIlver Plated Contacts
| | T103-SHAGE | Y | | | 1P On-Off-On | Horiz. Right Angle PCB | 3A 125VAC, 9.1mm Bat Actuator, 5.5mm 10-48 Bushing with Flat, Gold Over SIlver Plated Contacts
| | T105-SHCGE | | | | 1P (On)-Off-(On) | PCB Pins | 3A 125VAC, 9.1mm Bat Actuator, 5.5mm 10-48 Bushing with Flat, Gold Over SIlver Plated Contacts
| | T201-SYZGE | Y | | | 2P On-On | Solder | 3A 125VAC, 9.1mm Bat Actuator, 5.5mm 10-48 Bushing with Keyway, Gold Over SIlver Plated Contacts
| | T203-SYCGE | Y | | | 2P On-Off-On | PCB Pins | 3A 125VAC, 9.1mm Bat Actuator, 5.5mm 10-48 Bushing with Keyway, Gold Over SIlver Plated Contacts
|
|
|
|
|
|
